Recommended Furnace Maintenance Tasks

 Now that we are in September and have left the heat of the summer behind us, it is time to get ready for the cold of winter. You do not want to get caught in the cold with a faulty furnace, so perform your basic furnace cleaning and maintenance now to avoid the inconvenience of doing this work in the cold. Your friends here at Rooter Hero Plumbing are always ready to deliver quick and quality HVAC maintenance, repairs, and replacements, but we are also happy to share some tips. In this short article, we will go over some recommended furnace maintenance tasks. Feel free to call us to hire a qualified technician.

Clean the Burners

Before you begin working on the furnace, be sure to flip the electrical switch off and even toggle the respective circuit breaker off. You should also cut off the fuel supply. Then, remove the combustion chamber door. Vacuum the furnace base and the burners. Clean off any and all dust that you can and look for signs of soot. This fine black powder indicates poor combustion and might call for an HVAC technician. Rooter Hero Plumbing is happy to help.

Clean the Blower

Next, remove the blower and thoroughly vacuum inside. You can also use a small brush but be careful not to damage the wiring or disrupt the counterweights on the fan blades. If you are not confident in working sensitively, then leave this work to trained technicians. Throwing the components off balance can disturb the unit’s functionality.

Change the Furnace Filter

The furnace filter ensures you are getting good, clean air in your home, but it also protects the furnace’s fan, heating coil, and other components from dust, dirt, and other particles. It is best to check the owner’s manual for guidelines on how and when to remove the furnace filter, but, typically, you should change a basic fiberglass filter once every couple of months and a paper furnace filter once every three to four months.

Clean Other Components

Blow off any dust you find on the pilot or hot surface igniters. These parts are extremely sensitive, so avoid even touching them. You can clean them by blowing through a drinking straw. Then, remove the flame sensor by pulling it down out of its bracket. Lightly clean its surface with fine emery cloth and put the sensor back in place. Rooter Hero Plumbing is always happy to help with reliable, affordable, and accessible plumbing services in Glendale. Call now to get your free price estimate upfront.